







Opti-Lube Multi-Spray: 11oz Can, 6 Pack
6 aerosol cans, 11 oz net each of Opti-Lube Multi-Spray with a precision straw per can. Penetrates, displaces moisture and leaves a thin dry wax-like film to lubricate moving parts and help protect metal from rust and corrosion.
Multi-Spray Aerosol Lubricant — 6 Pack
Opti-Lube Multi-Spray combines penetration, moisture displacement and lubrication in a convenient aerosol. The solvent carrier spreads the lubricant and then evaporates, leaving a thin, dry wax-like film that helps reduce friction and protect metal surfaces from rust, corrosion and wear.
SKU: OPT-MS11-6
Formula: The same Multi-Spray lubricant used in every pack size.
Why choose Multi-Spray?
- Penetrates and lubricates: Reaches moving parts and sliding surfaces with an aerosol application.
- Displaces moisture: Helps protect metal surfaces exposed to damp conditions.
- Leaves a dry protective film: The wax-like finish helps resist wash-off and does not readily attract dust and dirt.
- Helps reduce friction and wear: Provides lubrication for suitable chains, cables, bushings and other moving components.
- Non-staining finish: Described as transparent when applied; test surface compatibility before use.
- Targeted application: Use the included straw to reach smaller lubrication points.
Common applications
| Application | Typical uses |
|---|---|
| Chains & cables | Bicycles, ATVs, go-karts, gates and garage-door mechanisms |
| Locks & hinges | Doors, tailgates, gates and compartment hardware |
| Sliding parts | Sliding doors and windows, bushings and shafts |
| Tools & machinery | Nuts and bolts, cutting blades and accessible lubrication points |
| Metal protection | Exposed bare-steel surfaces and off-road roll cages |
Match the lubricant to the component and follow the equipment manufacturer’s requirements. Some parts require a specific grease, oil or maintenance procedure.
Application and compatibility
- Read the can label and Safety Data Sheet before use.
- Test thoroughly on plastics, rubber and finished surfaces before treating the full area. The solvents may affect certain plastics and rubbers.
- Apply to the intended lubrication point; use the straw for a focused spray.
- Allow the carrier solvent to evaporate so the thin wax-like lubricating film remains. Follow the label and equipment instructions for application and return to service.
Product and package data
| Property | Details |
|---|---|
| Product | Opti-Lube Multi-Spray |
| SKU | OPT-MS11-6 |
| Pack quantity | 6 aerosol cans |
| Net contents per can | 11 oz by weight |
| Total net contents | 66 oz by weight |
| Application accessory | Precision straw with each can |
| Color as supplied | Light amber |
| Form as supplied | Low-viscosity liquid |
| After carrier evaporation | Thin wax-like solid film |
| Base carrier | Petroleum solvent |
Published test results
| Test / condition | Method | Reported result |
|---|---|---|
| Dynamic coefficient of friction | LFW-4 | 0.077 |
| Static coefficient of friction | LFW-4 | 0.087 |
| Salt-spray corrosion — 5% salt, 100 hours | ASTM B117 | No rust |
| Humidity cabinet — 60 hours at 120°F | ASTM D1748 | Pass |
These are published laboratory results under the stated conditions, not guarantees of service life in every application.
Choose the pack for your workspace
A six-can pack is convenient for stocking several workstations or a shop maintenance area. Each can contains the same formula and 11 oz net contents.
Single Can | 2 Pack | 6 Pack | 12 Pack
Review the Multi-Spray SDS for handling, storage and protective-equipment information.
View Safety Data Sheets →Questions about an application? Email sales@opti-lube.com or call or text 801-491-3717.

